Product Description
Designed to give a 90 degree butt joint between two tubes. Frequently used for the joint between end uprights and middle rail where the railing site is straight and level. Also used for base ties on racking. This fitting cannot be used where the tube passing through the sleeve is required to be jointed within the fitting.
Technical Data
Imagery
![10 [tech]](https://simplifiedbuilding.ie/media/catalog/product/cache/9/thumbnail/130x/9df78eab33525d08d6e5fb8d27136e95/i/m/image_260_2.jpg "10 [tech]")
![10 [tech]](https://simplifiedbuilding.ie/media/catalog/product/cache/9/thumbnail/130x/9df78eab33525d08d6e5fb8d27136e95/i/m/image_260_1_1.jpg "10 [tech]")
![10 [tech]](https://simplifiedbuilding.ie/media/catalog/product/cache/9/thumbnail/130x/9df78eab33525d08d6e5fb8d27136e95/i/m/image_261_1.jpg "10 [tech]")
| Model | Measurements (in.) | Weight (lbs.) | |||
|---|---|---|---|---|---|
| A | B | D | E | ||
| 10-98 | 2.38 | 1.90 | 2.94 | 2.52 | 1.43 |
| Model | Measurements (mm) | Weight (kgs) | |||
|---|---|---|---|---|---|
| A | B | D | E | ||
| 10-98 | 50.00 | 40.00 | 74.00 | 64.00 | 0.65 |
References A, B, C refer to the Outer Diameter of the pipe that fits inside the fitting.
Pipe Size Chart
The chart below will help you understand how to match the size of fittings and pipe.
3D Model
Click (hold mouse button down) and Drag to rotate the three dimensional image.
Additional Information
| Dimensional Weight (kgs) | 0.6500 |
|---|---|
| Actual Weight (kgs) | 0.65 |
| Manufacturer | Kee Safety |
| Brand | Kee Klamp |
| Material | Ductile Iron to BS EN 1563 |
| Standards | ASTM A47-77-32510, BS EN ISO 1461 |
