Simple Handrail Kits For Ramps or Steps
For convenience, we have pre-designed handrail kits available. The kits, as shown in the images below, cover a multitude of scenarios for where a handrail might need to be provided.
The required fittings are all included in each individual handrail kit and all that needs to be altered is the required upright heights and handrail length(or just the handrail length when the handrail is being fitted to the wall).
Need NDA Disabled Access Handrail?
SR-C50C58, this handrail kit consists of one upright with the other end being attached to the wall. The Type 55 fitting allows for an alternative design, where the handrail ends at the point where is connects to the upright.
Sr-070, the handrail is terminated at the fittings at each end, meaning the entire length of the handrail is continuous.
Simple to Install
All of our handrail kits are simple to install. A few basic tools are all that's required, such as (a) a drill for creating the holes to connect the fittings to the wall and/or ground, (b) a hammer for tapping in the fixing and end caps and (c) a spanner for tightening up the fixing. And of course a simple allen key for tightening up the fittings.
Longer Rails and Alternative Designs available
If you require a longer length of handrail than than the options provided, or require an alternative design, give us a call for design help on 1890 100 047. Or you can leave us a few details about your project on this contact form.