26-840C - Twin Handrail Socket Capped

ex VAT €11.35 inc VAT €13.96
plus minus
Model: 26-840C

Product Description

26-840C is a capped fitting for use as a capping on an upright which creates two handrail sockets at 90 degrees from the upright.


All the fittings in the Kee Access range are designed to construct handrails which are compliant with the recommendations made by the National Disability Authority, whose aim is to make handrails suitable for people with disabilities. The ideal construction of the handrail is outlined in Part M of the Building Regulations. It involves the handrail being smooth and continuous, with no terminations or breaks. The Kee Access range enables this to happen because the fittings are designed to align snugly with the outer edge of the tube, keeping the rail consistent.

All of our NDA fittings are to be used with Size 7(42.4mm) tube for the handrail itself, while fitting onto Size 8(48.3mm) uprights.

Galvanised Steel Fittings

Technical Data

Show in Imperial Show in Metric
Imagery
26 [tech]
26 [tech]
26 [tech]
Model Measurements (in.) Weight (lbs.)
ADEF
26-840C1.902.171.894.331.10
Model Measurements (mm) Weight (kgs)
ADEF
26-840C40.0055.0048.00110.000.50
References A, B, C refer to the Outer Diameter of the pipe that fits inside the fitting.

Pipe Size Chart

The chart below will help you understand how to match the size of fittings and pipe.

Pipe Fittings Size Chart

Additional Information

Dimensional Weight (kgs) 0.5400
Actual Weight (kgs) 0.54
Manufacturer Kee Safety
Brand Kee Access
Material Steel
Fitting Function ADA, Tee / Socket
Loads A Kee Access component (size 5 to 9) can support an axial load of 800Kg. per set screw with the set screw tightened to a torque of 39Nm. (rating includes a safety factor of 2:1)
Set Screw Case hardened steel, Kee Koat corrosion resistant coating
Standards BS EN ISO 1461
Shopping Basket