Most often used as the 90° joint between the top rail and a middle upright on a section of handrail.
This can be used where the tube needs to be joined at the fitting.
The Type 10 fitting can also be used where the tube runs straight through the fitting.
All Kee Klamp fittings are hot dip galvanised to BS EN 1461.
Tube Size Chart
*Please note that the N.B (internal diameter) of the tube can vary slightly.
|Loads||A Kee Klamp component (size 5 to 9) can support an axial load of 2000 lbs. per set screw with the set screw tightened to a torque of 29 lbs/ft. (rating includes a safety factor of 2:1)|
|Set Screw||Case hardened steel, Kee Koat corrosion resistant coating|
|Standards||ASTM A47-77-32510, BS EN ISO 1461|